一种固体导弹最大射程评定方法

本文提出了一种基于固体火箭发动机性能散布分析的固体导弹最大射程评定方法，将系统辨识、性能散布分析和统计分析有机结合，实用性强，对固体导弹试验鉴定技术研究具有重要意义。     

无缝坏块处理与流水编程的NAND型内存控制器设计与实现

为满足航天大容量存储系统对高速存储及数据完整的需求,实现了一个基于NAND型内存的高性能控制器,提出了一种实现于NAND型内存芯片内部的流水编程机制,以及一种可以保证数据无缝连接的坏块处理机制。介绍了存储控制器的各个模块设计,并分析了不同情况编程机制所需的时间计算方法,建立仿真模型,利用蒙特卡洛方法仿真并讨论了流水编程机制的性能优化效果。在实际硬件平台验证了流水编程机制和坏块处理机制,结果表明该大容量存储系统的存储速率可达100MB/s,读取数据与存入数据保持一致,数据无乱序无丢失。     

Preparation of ammonium nitrate-based solid composite propellants supplemented with polyurethane/nitrocellulose blends binder and their thermal decomposition behavior

To improve the performance of solid composite propellants (SCPs) supplemented with ammonium nitrate (AN) as an oxidizer, the incorporation of energetic ingredients such as explosives, energetic binders or catalysts is a common effective approach. For this purpose, polyurethane (PU), a typical inert binder, was mixed with nitrocellulose (NC) as an energetic polymer. Numerous composite solid propellant compositions based on AN and NC-modified polyurethane binder with different NC ratios were prepared. The prepared formulations were characterized using Fourier transform infrared spectroscopy (FTIR), RAMAN spectroscopy, X-ray diffraction (XRD), electron densimetry, thermogravimetric (TG) analysis, and differential scanning calorimetry (DSC). A kinetic study was then performed using the iterative Kissinger-Akahira-Sunose (It-KAS), Flynn-Wall-Ozawa (It-FWO), and non-linear Vyazovkin integral with compensation effect (VYA/CE) methods. The theoretical performances, such as theoretical specific impulse, adiabatic flame temperature, and ideal exhaust gaseous species, were also determined using the NASA Lewis Code, Chemical Equilibrium with Application (CEA). Spectroscopic examinations revealed the existence of NC and full polymerization of PU in the prepared propellants. According to density tests, the density of the propellant increases as the nitrocellulose component increases. According to the thermal analysis and kinetics study, the increase in NC content catalyzed the thermal decomposition of the AN-based composite solid propellants. Based on the theoretical study, increasing the amount of NC in the propellant increased the specific impulse and, as a result, the overall performance.     

Burning characteristics of high density foamed GAP/CL-20 propellants

The monolithic foamed propellants with high densities were prepared by casting and two-step foaming processes. Glycidyl azide polymer (GAP) and isocyanate were used as the binder system and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (HNIW, CL-20) was employed as the energetic component. The newly designed formulation containing 60 % CL-20 produced a force constant of 1077 J/g and low flame temperature of 2817 K. Two foamed propellants with densities of 1.32 g/cm³ and 1.53 g/cm³ were fabricated by a confined foaming process and examined by closed bomb tests. The results revealed that porosity significantly affects burning performance. A size effect on combustion behaviors was observed for the foamed propellant with 5.56 % porosity, and a double-hump progressive dynamic vivacity curve was obtained. At last, the 30 mm gun test was carried out to demonstrate the interior ballistic performance, and the muzzle velocity increased by 120 m/s at the same maximum chamber pressure when monolithic propellant was added in the charge.     

围压下固体推进剂的破坏机理分析

贴壁浇筑的固体发动机推进剂药柱在点火状态下处于三向围压状态,而环向承受拉应变,亟待对围压下推进剂的破坏机理展开研究。基于自研的围压加载试验系统,通过开展推进剂在不同围压、温度和应变率下的单轴拉伸试验来研究围压、温度和应变率的耦合作用对推进剂力学行为的影响。针对围压下推进剂的力学响应特征,通过细观力学仿真进一步研究围压下推进剂的破坏形式,同时借助电镜扫描试验分析推进剂试样断面的形貌特征,通过试验和仿真相结合的手段分析了围压下推进剂的破坏机理。研究结果表明,围压下推进剂的损伤界面显著减少,且随着围压载荷的逐渐增加,推进剂的损伤形式从以颗粒脱湿为主转变为以颗粒破碎为主。     

Controllable combustion behaviors of the laser-controlled solid propellant

Microsatellites have been widely applied in the fields of communication,remote sensing,navigation and science exploration due to its characteristics of low cost,flexible launch mode and short development period.However,conventional solid-propellant have difficulties in starting and interrupting combustion because combustion is autonomously sustained after ignition.Herein,we proposed a new type of solid-propellant named laser-controlled solid propellant,which is sensitive to laser irradiation and can be started or interrupted by switching on/off the continuous wave laser.To demonstrate the feasibility and investigate the controllable combustion behaviors under different laser on/off conditions,the combus-tion parameters including burning rate,ignition delay time and platform pressure were tested using pressure sensor,high-speed camera and thermographic camera.The results showed that the increase of laser-on or laser-off duration both will lead to the decrease of propellant combustion performance during re-ignition and re-combustion process.This is mainly attributed to the laser attenuation caused by the accumulation of combustion residue and the change of chamber ambient temperature.Simultaneously,the multiple ignition tests revealed that the increased chamber ambient temperature after combustion can make up for the energy loss of laser attenuation and expansion of chamber cavity.However,the laser-controlled combustion performance of solid propellant displayed a decrease trend with the addi-tion of ignition times.Nevertheless,the results still exhibited good laser-controlled agility of laser-controlled solid propellant and manifested its inspiring potential in many aspects of space missions.     

通用导弹告警设备的试验和研究

导弹在进攻时,其截面相当于一个偶极子天线或单根箔条,利用导弹对特定频率雷达信号的谐振特性来增大目标的散射截面积。通过反辐射导弹告警实验设备系统的实弹打靶试验,验证了该理论的正确性和可行性。     

两路相互注入锁定Nd:YAG激光器

通过锁定多模块输出激光相位实现激光功率扩展的相干合成技术是获得高能高光束质量光源的有效途径.本文分析了相互注入锁定相干合成的机理及其对激光器相干性的影响,利用偏振元件将两路独立的Nd:YAG激光器关联起来,解决了耦合过程中的损耗问题,实现了两路激光器的相互注入锁定,获得了总功率4.4W的部分相干激光输出,长曝光结果表明远场光斑峰值功率密度提高了1.4倍,对利用相干合成技术实现高能固体激光器技术进行了初步探索.     

固体发动机尾部点火性能影响因素分析

采用准一维非定常数值模型,对某小型固体发动机尾部点火瞬态过程进行性能预示;以预示结果为基础,对尾部点火性能主要影响因素进行了参数研究.研究结果可为尾部点火器和喷管堵盖的点火匹配性设计提供有益指导.     

定应变作用下NEPE推进剂老化特性及寿命预估研究

为考察定应变作用下NEPE推进剂的老化特性,研究了20%定应变作用下NEPE推进剂贮存老化过程中力学性能、凝胶性能和界面性能的变化.研究结果表明:定应变作用下NEPE推进剂在贮存老化过程中最大抗拉强度降低,最大延伸率变化较小,其老化失效主要表现为强度的失效;定应变下NEPE推进剂的凝胶百分数和粘附功随老化时间的延长而降低,NEPE推进剂粘合剂基体的降解断裂和界面的"脱湿"是其主要的老化机理;定应变下NEPE推进剂的力学性能与细观性能的相关性研究表明,最大抗拉强度与凝胶百分数和粘附功存在相关关系,计算了其关系式,建立了由细观性能评估推进剂宏观力学性能的方法;选择最大抗拉强度下降30%时失效,20%定应变下NEPE推进剂的贮存寿命为8.3年.